Two weeks ago, during the TCD layout tour, I noticed that the walls on my depot had bowed considerably. We had all of the doors and windows in the house open, and it was a bit humid that day, so I blamed that for the warpage. I figure a few days with the A/C running, things would dry out and return to normal. No such luck. This is what the depot looks like right now:
She has curves in all the wrong places. I'm not sure what, if anything, can be done to fix this, so I'm starting over. Dave Jasper, one of the visitors to the layout, asked a very pointed question. "Why are you building it this way, if the studs won't be visible anyway?" Good question, and the only answer I had was "Just because". I don't have a good reason, other than it seemed like a good idea at the time. I sit here now, though, looking at several hours of effort wasted.
I've followed the work of Troels Kirk for a long time, and I find it fascinating what he can do with black matte board and paper. I decided to give that a try. I started by cutting my four main walls out of a piece of matte board.
Conveniently, the back side of the board is white. On the back of each piece, I draw a grid identical to the stud design of the first model. This made it easy to plot out the window and door openings.
It turns out that the matte board that I'm using is almost exactly 4 scale inches thick, or about the same thickness as the scale 2"x4" studs that I used in the first model. The new walls won't be any different than the old ones in terms of thickness.
Using a brand new knife blade (the safest blade is a sharp blade), and the handy grids that I drew on the wall segments, I cut out all of the window and door openings.
A little bit of trusty Elmer's Glue, and the first two wall segments are joined together.
The best part? It took less than 2 hours to get this far. The first model, with the framed walls, took about a week of evenings to reach the point shown in that first photo. I might have just found a new favorite construction technique!
